Ways to stick large stickers and sun stripes evenly

Ways to stick large stickers and sun stripes evenly

Applying large stickers or sun stripes to your car can be a task that requires precision and patience. Here are some proven methods that will help you achieve even and aesthetic results when applying large stickers or sun stripes on your car windshield.

1. Care and precision
   The first step to achieving even application is accuracy. Make sure you have enough time and space to work to avoid rushing. Try to work in a place with good visibility to make it easier to control the process.
2. Marking of reference points
   Before you start applying, mark reference points to help you keep your sticker or sun strip evenly positioned. You can use adhesive tape or special markings to mark the lines or places where you want to place the sticker.
3. Help from another person
   Applying large stickers or sun stripes may be easier with the help of another person. Ask someone to assist you by helping you keep the sticker in position during application.
4. Application from the inside out
   When you are ready to apply the sticker, start in the center and slowly move outwards, gently pushing the air out to the sides. This will avoid air bubbles under the sticker.
5. The help of a squeegee or a soft cloth
   You can use a squeegee or a soft cloth to evenly press the sticker onto the surface and remove any air bubbles. Start in the center and gently move outwards, removing air as you go.
6. Time to harden
   Once you have finished applying your decal or sunbelt, give it time to cure. Typically, manufacturers provide recommendations regarding drying times. Avoid exposing them to sun or rain until they are completely cured.